Fearless Forums
[INACTIVE] [Cow's Dupes] Request your dupes. - Printable Version

+- Fearless Forums (https://fearlessrp.net)
+-- Forum: CityRP Server (https://fearlessrp.net/forumdisplay.php?fid=6)
+--- Forum: Marketplace (https://fearlessrp.net/forumdisplay.php?fid=24)
+---- Forum: Sold/Bought/Closed (https://fearlessrp.net/forumdisplay.php?fid=35)
+---- Thread: [INACTIVE] [Cow's Dupes] Request your dupes. (/showthread.php?tid=29657)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18


RE: [Cow's Dupes] Request your dupes. - Imperator - 10-16-2013

Yes Please. I didnt left Its just a short break. Smile


RE: [Cow's Dupes] Request your dupes. - Weecow - 10-16-2013

Tomorrow I will do some requests, if the server isn't getting DDoS'ed.


RE: [Cow's Dupes] Request your dupes. - Weecow - 10-17-2013



- Tandy's dupe has been sold for: 15,000$.

- Mcnam33man12's dupe has been sold for: 2,000$.

- Zombieshoother's request is done. Check it out below!





Binding info, Winch info & "How to enable hydraulic door"


Spoiler :
For the hydraulic door, first door
1. Freeze the door using your physgun.

2. No collide the door

3. Take out the "Precision tool"

4. Go to "Apply" within the precision tool

5. Check 2 boxes when you clicked apply, check the box "Only collide with players" aswell as "Freeze target" so it doesn't fall through the map.

6. Take out the "Weld" tool and unweld the 2 hydraulic doors, by clicking R on it

7. Collide the 2 doors again and unfreeze them by touching them with the physgun

8. Make the keypads.

Binded keys

Hydraulic door is assigned to the "-" on my numpad.

The elevator winch (up) is assigned to "kp_home" or KP_7 on your numpad.

The elevator winch (down) is assigned to "kp_ins" or KP_0 on your numpad.

The keypads are the same as above.

The winch

When you spawn the dupe freeze the elevator, the 2 buttons and a small prop right behind it then unweld the elevator the 2 buttons and the small prop behind it, and weld it again with the 2 buttons and the small prop behind it. Make sure to weld it properly, move it up a bit to see if it all works and start using it!






RE: [Cow's Dupes] Request your dupes. - Zambie - 10-18-2013

(10-17-2013, 05:10 PM)Weecow Wrote:


- Zombieshoother's request is done. Check it out below!





Binding info, Winch info & "How to enable hydraulic door"


Spoiler :
For the hydraulic door, first door
1. Freeze the door using your physgun.

2. No collide the door

3. Take out the "Precision tool"

4. Go to "Apply" within the precision tool

5. Check 2 boxes when you clicked apply, check the box "Only collide with players" aswell as "Freeze target" so it doesn't fall through the map.

6. Take out the "Weld" tool and unweld the 2 hydraulic doors, by clicking R on it

7. Collide the 2 doors again and unfreeze them by touching them with the physgun

8. Make the keypads.

Binded keys

Hydraulic door is assigned to the "-" on my numpad.

The elevator winch (up) is assigned to "kp_home" or KP_7 on your numpad.

The elevator winch (down) is assigned to "kp_ins" or KP_0 on your numpad.

The keypads are the same as above.

The winch

When you spawn the dupe freeze the elevator, the 2 buttons and a small prop right behind it then unweld the elevator the 2 buttons and the small prop behind it, and weld it again with the 2 buttons and the small prop behind it. Make sure to weld it properly, move it up a bit to see if it all works and start using it!




This had nearly nothing to do with what i asked.

Reasons:

president or guard can watch from the top floor.
** There is one but you can see a inch of the floor **

Also i would like a part on the second floor that the sru can shoot from.
** They cant shoot through that little hole **

Bullet Proof Glass for nexus secretaries
** I don't even see a place for secretaries **

A Elevator that takes from the first to the second floor. Key pad protected not button
** The elevator has buttons not keypads as asked **

Its very dark inside and outside....

I did not like it...

I expected more.....


RE: [Cow's Dupes] Request your dupes. - Weecow - 10-18-2013

Fore the keypads; if I would make a keypad i would need to make 2 making it very unclear on which to use.

For he sru to shoot through; Remember I have a proplimit and I can't fit everything within it. And this will easily come out as a doomfort..

Secretaries place is up stairs where they stand at the glass an arrange meetings.

For the darkness, that's something i can't do anything about It's the server.

Can't fit everything in the prop limit that's near impossible. Remember that this is a very low cost dupe and I would like some appreciation instead of those kinds of replies. Take it or leave it.


RE: [Cow's Dupes] Request your dupes. - DooZâ„¢ - 10-18-2013

2 Things, firstly need a house,

1. What do you want me to make?: A nice medium house.
2. Building Details(Required, make it as detailed as possible): I would like a nice house with garage and good protection to make some contra in it.
3. Around what date do you like it to be finished?: Anytime is good.
4. At what server do you want it? And where at that server?: 33x, you pick the best spot please Tounge
5. What quality do you want it to be? (Low-Medium-High, keep in mind it can take longer depending on the quality): Medium should be fine.
6. Which server do you play?: Mostly in 33x, but also in v2d, but never in v2p.
7. What TimeZone do you live in?:
8. Do you agree the rules? And have you read them?: Yup
9. Copy rule number 6 and 2 and past them here.
"2. You need to fill out the Template, otherwise it will not be made. Also fill the template out properly otherwise it will also not be made."
" 6. Do not make a request with more than 30 props, for example not big clan bases that require many props."

and second

I would like to buy Killaninja's portable gun shop, Kulthro's/KYR Shadow's Clan Base, and mcnameeman12's Security Checkpoint.

Add me on steam, thedoozguy / gamerdouble, and we will discusse prices and stuff like that please Smile


RE: [Cow's Dupes] Request your dupes. - Weecow - 10-18-2013

(10-18-2013, 04:49 PM)DooZ™ Wrote: 2 Things, firstly need a house,

1. What do you want me to make?: A nice medium house.
2. Building Details(Required, make it as detailed as possible): I would like a nice house with garage and good protection to make some contra in it.
3. Around what date do you like it to be finished?: Anytime is good.
4. At what server do you want it? And where at that server?: 33x, you pick the best spot please Tounge
5. What quality do you want it to be? (Low-Medium-High, keep in mind it can take longer depending on the quality): Medium should be fine.
6. Which server do you play?: Mostly in 33x, but also in v2d, but never in v2p.
7. What TimeZone do you live in?:
8. Do you agree the rules? And have you read them?: Yup
9. Copy rule number 6 and 2 and past them here.
"2. You need to fill out the Template, otherwise it will not be made. Also fill the template out properly otherwise it will also not be made."
" 6. Do not make a request with more than 30 props, for example not big clan bases that require many props."

and second

I would like to buy Killaninja's portable gun shop, Kulthro's/KYR Shadow's Clan Base, and mcnameeman12's Security Checkpoint.

Add me on steam, thedoozguy / gamerdouble, and we will discusse prices and stuff like that please Smile

Sorry but I can't sell their dupes. The clan base has already been sold due to the owner not getting the dupe.

Your dupe is approved. When the servers are back up I'll start again.


RE: [Cow's Dupes] Request your dupes. - DooZâ„¢ - 10-18-2013

Shame I can't have those Tounge but it's okay, if you do a nice job I'll ask u more Smile Thanks for acepting.


RE: [Cow's Dupes] Request your dupes. - Zambie - 10-18-2013

Where do we meet for the dupe?


RE: [Cow's Dupes] Request your dupes. - jetfire245 - 10-19-2013

What do you want me to make?: A security checkpoint
2. Building Details:I want it to be very similar to your other security checkpoint but maybe it could have something like a flashing light to signal you to stop or go
3.Around what date do you like it to be finished?:I'm looking for1-2 weeks but I have no tight deadline so take your time
4.At what server do you want it? And where at that server?: Don't know if it's possible but I need it for v2d and v33x
5.What quality do you want it to be? (Low-Medium-High, keep in mind it can take longer depending on the quality:I want medium to high quality
6.Which server do you play?:v2d and v33x
7. What TimeZone do you live in?:eastern standard
8.Do you agree the rules? And have you read them?:of course I do and yes I completely agree.
9. 6.Do not make a request with more than 30 props, for example not big clan bases that require many props. 2.You need to fill out the Template, otherwise it will not be made. Also fill the template out properly otherwise it will also not be made.